Laser marking machines use laser beams to mark permanent surfaces on a variety of different materials. The effect of marking is to expose deep materials through evaporation of surface materials, thus engraving exquisite patterns, trademarks and characters. Laser marking machines are mainly divided into CO2 laser marking machines, semiconductor laser marking machines, and fiber laser marking machines. And YAG laser marking machine.

At present, laser marking machines are mainly used in some occasions requiring more precise and higher precision. Used in electronic components, integrated circuits (IC), electrical appliances, mobile communications, hardware products, tool accessories, precision equipment, glasses and clocks, jewelry, auto parts, plastic buttons, building materials, PVC pipe.

The laser marking machine can engrave a variety of non-metallic materials. Used in clothing accessories, pharmaceutical packaging, wine packaging, architectural ceramics, beverage packaging, fabric cutting, rubber products, shell nameplates, craft gifts, electronic components, leather and other industries.

At present, in the laser marking machine, the occupancy of the fiber laser marking machine reaches more than 60%. How to maintain the metal laser marking machine?

1. There is no offset change in the height position of the lifting machinery guide on the workbench before use.
2, need to clean the field mirror regularly, you can use a rag to add a small amount of alcohol to clean before use, pay attention to rub in one direction.
3. Clean the laser inside the chassis. You can use the air gun to blow along the air duct and clean the relevant circuit board inside the chassis.
4. Check if the software settings have changed before starting the machine.
5. Need to operate the steps of the switch.
6, the host computer, the keyboard pay attention to clean.
7. Check the button to see if the indicators are normal.
8. Regularly check the fan operation status and correct the fan that is not working properly.
9. After using the shutdown, it is necessary to remove the garbage in time, especially after the marking, metal residue or metal powder, clean the surrounding sanitation and keep the ventilation.

Leave a Reply

Your email address will not be published. Required fields are marked *